tag:blogger.com,1999:blog-7668013170545944569.post1274486579808705896..comments2024-02-14T10:15:20.382-08:00Comments on Bumbershoot Designs and Supplies: Tutorial: Tips for Gluing Vintage Glass and Plastic CabochonsBumbershoot Designs and Supplieshttp://www.blogger.com/profile/06024905385792751578noreply@blogger.comBlogger35125tag:blogger.com,1999:blog-7668013170545944569.post-7207729895070193422016-08-20T10:31:11.638-07:002016-08-20T10:31:11.638-07:00This has been very helpful! Even though I did not ...This has been very helpful! Even though I did not have the best luck with e6000, I love the rice to hold my earrings. I think I need to focus on curing times in my search for the best glue.... Thanks for sharing!Tiffanyhttps://www.instagram.com/skyhiearringco/?hl=ennoreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-27112466837678830752015-09-04T10:28:24.235-07:002015-09-04T10:28:24.235-07:00Whenever I end up with too much E6000 I usually en...Whenever I end up with too much E6000 I usually end up scraping it away with a sharp tool. I have heard that acetone might work to loosen or dissolve E6000, but I have not tried it. There probably are more ideas online, but those are 2 approaches you might try.Bumbershoot Designs and Supplieshttps://www.blogger.com/profile/06024905385792751578noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-19578856772738244742015-09-03T18:53:05.129-07:002015-09-03T18:53:05.129-07:00Sooo I attached some bezels and cabochons with E60...Sooo I attached some bezels and cabochons with E6000, and I was wondering if there was a way to dissolve E6000 so I could reuse my supplies? 9 of the batch I made turned out bad ( due to not sealing artwork first), and I'd like to try again. GuiseMakerhttps://www.blogger.com/profile/13434647697210708205noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-30928484289797116882015-03-13T17:02:42.955-07:002015-03-13T17:02:42.955-07:00I have not tried resin, so I don't know what t...I have not tried resin, so I don't know what to recommend there. If anyone has, please feel free to let us know what you have used and how it works as a glue.Bumbershoot Designs and Supplieshttps://www.blogger.com/profile/06024905385792751578noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-33655645151126328232015-03-13T10:51:04.985-07:002015-03-13T10:51:04.985-07:00Have you tried resin? If so, with which result? :)...Have you tried resin? If so, with which result? :)Anjahttps://www.blogger.com/profile/05089180215480997120noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-91708245503036352782015-03-11T09:16:07.958-07:002015-03-11T09:16:07.958-07:00I have used so many different glues and find that ...I have used so many different glues and find that E6000 is the best, however, I double checked my work, today which is cabochons or flatbacks glued to metal ring bases, and tugged on them only to find that some, not all, just popped off. I clean, sand, hold, leave to dry and now don't know what I need to do next.Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-1733172454179886642015-03-05T13:35:40.732-08:002015-03-05T13:35:40.732-08:00Thanks for cool advice. Although I have figured ou...Thanks for cool advice. Although I have figured out most of them by myself, they´re fun to read!Ritanoreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-7889502588765794992014-02-17T07:04:27.882-08:002014-02-17T07:04:27.882-08:00Thanks for this easy to follow advice. I've ne...Thanks for this easy to follow advice. I've never used cabachons before and I want to for the first time so this is just what I needed!Anonymoushttps://www.blogger.com/profile/03652076392315383181noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-83394463914634553202013-10-09T13:06:47.234-07:002013-10-09T13:06:47.234-07:00Good question! I don't have direct experience ...Good question! I don't have direct experience with this, but I recommend searching Google with the key words "temporary fabric adhesive" or "temporary fabric glue". When I do this, I find lots of different products that may meet your needs, many with customer reviews that may be helpful. Good luck! ~SharonBumbershoot Supplies and Designshttp://www.bumbershootsupplies.comnoreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-74543207615755323862013-10-08T17:48:24.970-07:002013-10-08T17:48:24.970-07:00They are flatback ones and I only want them tempor...They are flatback ones and I only want them temporarily on a sequin dress is this possible? saravtthttps://www.blogger.com/profile/05396071717035312128noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-82598077721997716392013-10-08T17:47:12.298-07:002013-10-08T17:47:12.298-07:00I want to attach some cabochons to a sequin dress ...I want to attach some cabochons to a sequin dress TEMPORARILY. How do you suggest I do that? saravtthttps://www.blogger.com/profile/05396071717035312128noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-59080598480736608502013-07-08T18:53:04.480-07:002013-07-08T18:53:04.480-07:00Hi there,
So glad to hear you found the informati...Hi there,<br /><br />So glad to hear you found the information helpful! Thanks for the extra tips.<br /><br />SharonBumbershoot Designs and Supplieshttps://www.blogger.com/profile/06024905385792751578noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-7050187117694216702013-07-08T10:11:25.514-07:002013-07-08T10:11:25.514-07:00Hi Sharon,
Thanks for the tips! Love the rice bal...Hi Sharon,<br /><br />Thanks for the tips! Love the rice ball idea. :)<br /><br />I have also used the method were both the setting and the stone have glue. That has worked well - with bigger items. For some reason, I can't make smaller stones to attach. Perhaps the problem is with the amount of glue, there's easily too much or too little of it. It's clumsy!<br /><br />I also roughen the surfaces. And I have always put a glue spot in the center. Never thought I could used alcohol on plated brass though. Maybe I should give that a try.Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-49024455210139917382013-07-06T11:19:05.758-07:002013-07-06T11:19:05.758-07:00Hi Karen,
Yes indeed, I have used the same appr...Hi Karen, <br /><br />Yes indeed, I have used the same approach to glue metal to metal, with good results. Sometimes roughing up the metal surfaces can help provide a bit of "tooth". Good luck!<br /><br />SharonBumbershoot Designs and Supplieshttps://www.blogger.com/profile/06024905385792751578noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-81586669202116858072013-07-06T02:17:31.023-07:002013-07-06T02:17:31.023-07:00Hi Sharon,
I've learned something useful from...Hi Sharon,<br /><br />I've learned something useful from your post. The toothpick idea is certainly ingenious.<br /><br />I wish to try attaching silver plated brass filigrees onto the cab setting of a locket.<br />Will the same method above work?<br /><br />Thank you <br />Karen Karenhttps://www.blogger.com/profile/06764947168430985663noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-27291591390880633582012-04-19T15:23:33.309-07:002012-04-19T15:23:33.309-07:00Hi Doreen, I'm glad you've found the post...Hi Doreen, I'm glad you've found the post helpful! Yes, I think it can sometimes help to rough up the surface(s) you are gluing to create a better bond, especially if they are both slick surfaces. I know some folks have good experience with waiting until E6000 is a bit tacky before joining the surfaces. It is always good to try a few methods to see what works best for your situation. Thanks for the tips! ~SharonSharon, Bumbershoot Supplieshttp://www.bumbershootsupplies.comnoreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-35201771824852560232012-04-18T23:18:09.043-07:002012-04-18T23:18:09.043-07:00I am new at this and have appreciated your instruc...I am new at this and have appreciated your instructions, but after scratching the metal surface and cleaning with alcohol I apply E6000 to both surfaces then let it set up for a minute or two before joining them. This seems to give an almost instant bond with no movement or oozing and holds well.Doreennoreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-68884706781414893182012-04-11T14:00:42.452-07:002012-04-11T14:00:42.452-07:00Hi Jennifer, Thanks for your interest! I don’t hav...Hi Jennifer, Thanks for your interest! I don’t have direct experience to share, but I think my response to Julia above, applies here also. Basically, I’m thinking the blotches you see are an interaction between the glue and paper, and you may need to put a barrier between the two. This can also be seen when working with resin, which is why I suggest researching that topic. It helps to bring a spirit of inquiry and adventure, because it may take a few tries before you find a combination of paper – ink – sealant and/or glue that will work. Good luck! ~SharonSharon, Bumbershoot Designs and Supplieshttp://www.bumbershootsupplies.comnoreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-45418162953314200892012-04-09T13:59:24.499-07:002012-04-09T13:59:24.499-07:00Interesting post. What about gluing cabochons to ...Interesting post. What about gluing cabochons to a photo? I just tried gluing my glass cabochon to my photo and I'm seeing some spots. Wondering if it is going to disappear after a little bit. I love getting the cabochon stickers and the epoxy stickers for my photos for the bottle caps and the cabochon settings. But I have the glass cabochons too.https://jenniferjofaypaperdolls/blogspot.comhttps://www.blogger.com/profile/00688804724606888311noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-79250716387205797962012-03-14T18:17:38.654-07:002012-03-14T18:17:38.654-07:00Hi Julia, I don't have specific advice since ...Hi Julia, I don't have specific advice since I have not tried to do this. But maybe there is a parallel with using resin. I don't work with resin, except for a few experiments, but I've done some reading about it. I have learned that when pouring resin over paper, it is usually necessary to seal the paper before pouring the resin, otherwise you can get bleeding and blotches on the paper. I've also learned that different types of paper and ink (for example, laser vs. ink jet) can have different results. You will find lots of discussion of sealing paper, and types of glues for sealing as well as types of paper and ink, with a quick Google search. I'm thinking this information might lead to a few useful experiments to try for your situation. I hope this is helpful! ~SharonSharon, Bumbershoot Supplieshttp://www.bumbershootsupplies.comnoreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-63594850097459002762012-03-14T17:56:59.288-07:002012-03-14T17:56:59.288-07:00I use E6000 glue for cabs but it shows through if ...I use E6000 glue for cabs but it shows through if I glue a clear cab over a digital image. It soaks though the paper. Could you help me?<br />Thanks, JuliaAnonymousnoreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-84705415436472467742012-02-19T11:35:37.707-08:002012-02-19T11:35:37.707-08:00Hi Christine,
First, I want to give you kudos for...Hi Christine,<br /><br />First, I want to give you kudos for checking your designs over time to see how they are performing. It is a really important aspect of quality control, so hats off to you! <br /><br />Here are some ideas I had about your issue, in no particular order: You could double check that the surfaces you are gluing are clean. Metals often have residue from the manufacturing process and this can interfere with the bond. Be sure that your glue is fresh (E6000 dries out quickly) and that you allow your designs to cure at least 24 hours. Make sure you are using enough glue, so for example, make sure your glue goes as close to the edge of the cabochon or gluing pad as possible so the full gluing surface is used. You might want to consider roughing up your metal gluing pad with sandpaper to create a bit of “tooth” before you glue. I have noticed that various settings have gluing pads with cross hatched or bumpy surfaces, which presumably serve the same purpose. You will likely get a better hold if you use a finding with a gluing pad that is as close in size as possible to the cabochon (vs. a small gluing pad with a large cabochon). Another approach would be to use a finding with a setting that can be squeezed around the cabochon. I am thinking in particular of lace edged settings, which have a flat base for gluing and then a scalloped edging that can be tightened around the cabochon. It’s just another way to ensure the cabochon stays put. You can also experiment with various epoxys to see if you get a better result, although I can’t make a recommendation since I don’t have experience with them. <br /><br />I hope some of these ideas are helpful to your situation. Good luck!Bumbershoot Designs and Supplieshttps://www.blogger.com/profile/06024905385792751578noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-87825877323898673672012-02-17T06:16:41.900-08:002012-02-17T06:16:41.900-08:00Sharon,
I've been using the E-6000 glue for so...Sharon,<br />I've been using the E-6000 glue for some time now. Recently, I was checking over some of my jewelry pieces that were made some time ago. As I was giving one of my pieces the little 'tug' test to make sure it was still bonded properly - it just popped right off! And as I tested another, it did the same. These were glass cabs glued to a brass setting for bobby pins. Am I doing something wrong for this to happen? Or should I use a different type of glue in this instance. I want my pieces to be durable and last through time.<br />Thanks,<br />ChristineChristinehttps://www.blogger.com/profile/03187125175838411811noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-57533157182517001512011-11-29T09:50:52.387-08:002011-11-29T09:50:52.387-08:00it wasn't easy to find some good tips for star...it wasn't easy to find some good tips for starting on cabochon jewelry making, but your post is invaluable! thanks for sharing!!Oksanahttps://www.blogger.com/profile/05856918840274938031noreply@blogger.comtag:blogger.com,1999:blog-7668013170545944569.post-58760183877143036882011-10-18T17:49:29.211-07:002011-10-18T17:49:29.211-07:00Hi glorious eporium,
Great question! I’m sure it...Hi glorious eporium,<br /><br />Great question! I’m sure it is possible for components in the E6000 to react adversely with components of the foil on certain vintage rhinestones. I can’t speak from experience, since I do not do jewelry repair. Also, in working with foil backed cabochons and rhinestones, I have never had the problem you describe with E6000. But it is important to make a distinction between working with vintage “new old stock” that has never been made into jewelry and making repairs to vintage pieces, since these have very different histories, cleaning needs, etc. compared to the vintage items I work with. I did a bit of research and here is what I can offer:<br /><br />1. A lot of folks swear by G S Hypo Cement. It is supposed to remain clear (not yellow) and can be purchased in a tube with a needle-like applicator which is great for small places. I have had mixed experiences with it, so I don’t use it for my purposes any more, but lots of folks recommend it for vintage jewelry repair.<br /><br />2. I have never tried it, but one of my colleagues uses clear Sally Hansen Hard As Nails to glue small rhinestones. The brush is handy too. If you try this, I’d love to know how it works.<br /><br />Other things to consider:<br /><br />3. Always be sure the foil is intact. If the foil is damaged, scratched or flaking, which often happens when a glued-in stone falls out of a setting, this means the seal of the foil to the glass is compromised. This could create 2 issues: first that the damaged foil more readily reacts with components in the glue you are using and second, instead of the glue being on the foil, it is on the glass, which will dull the appearance of the stone when viewed from the front. When the foil is no longer intact, I suggest locating a replacement stone (or stones, since it may ultimately be necessary to replace all similar stones in order to obtain the best appearance).<br /><br />4. When purchasing replacement stones, buy a couple extra and try applying your glue to the back of one stone. Let the stone dry for a day or two and see what happens. If you don’t see clouding, you can more confidently proceed.<br /><br />I hope this is helpful! Thanks for asking!Sharon, Bumbershoot Designs and Supplieshttp://www.bumbershootsupplies.comnoreply@blogger.com